中文

Home

2023

Installation key of pneumatic support rod

Author:

1. The gas spring piston rod must be installed in a downward direction and must not be inverted, which can reduce conflicts and ensure damping quality and cushioning function. 2. Determining the orientation of the fulcrum device is a guarantee that the spring can operate correctly. The gas spring must be installed using the correct method, that is, when closed, let it move past the center line of the structure 3. The gas spring should not be subjected to the effects of oblique or lateral forces during operation. Do not use as a handrail. In order to ensure the reliability of sealing, it is not allowed to damage the appearance of the piston rod, and it is prohibited to apply paint and chemicals to the piston rod. It is also not allowed to install the gas spring in the required orientation first Spray and paint. 5. The gas spring is a high-pressure product, and it is prohibited to dissect, bake, or touch it at will. 6. The gas spring piston rod is prohibited from rotating to the left. If it is necessary to adjust the direction of the connector, only scroll to the right. Operating ambient temperature: - 35 ° C -+70 ° C (80 ° C for specific manufacturing) 8. The connection point of the device should be sensitive to rolling and free of jamming.

Installation key of pneumatic support rod

Exhibition:

2019, AAPEX, Las Vegas, USA, Automotive Aftermarket Products Expo,

05-07 Nov, our booth no is 11038

2019, International Fastener Expo September 17 - 19, 2019, Las Vegas, USA

Our booth no is 2516

2019, Mechanical Components & Materials Technology Expo Osaka, Japan,

Our booth no is 36-35, Hall 6A

2015, Hannover Messe in Germany, Our Booth no. B48-38, Hall 5

Hope to do business with you now.